Jul 30th, 2010, 2:22am
   FabulaTech Forum
   Serial Port Solution
   Network Serial Port Kit (Moderators: George_White, Alex_Webster, Mike, Andrew)
   Remote and Shared PC Must Be on Same Network?		 « Previous topic | Next topic »
Pages: 1  Reply Reply Notify of replies Notify of replies Print Print
   Author  Topic: Remote and Shared PC Must Be on Same Network?  (Read 14 times)
RonBS
FabulaTech Forum Newbie
*





   
View Profile

Posts: 1
Remote and Shared PC Must Be on Same Network?
« on: Feb 25th, 2009, 8:06am »		 Quote Quote Modify Modify
Hi, I've had success with this product if both PCs are on the same network, but when attempting a link via internet on 2 different networks it does not work.
 
Is it required that they be on the same network?
IP Logged
Mike
FabulaTech Forum Moderator
FabulaTech Forum Junior Member
*****






   
View Profile WWW

Gender: male
 Posts: 96
Re: Remote and Shared PC Must Be on Same Network?
« Reply #1 on: Feb 26th, 2009, 12:33am »		 Quote Quote Modify Modify
Hi Ron,
 
USB over Network works via the Internet as well as via the local network. All that you need to connect two PCs (for all cases) is the DIRECT IP address of the Server (PC where device is connected physically). When two PCs are on different networks, they have only their local IP addresses, so in this case you need to configure port forwarding on Server PC. You can also create VPN connection between these two PCs.
 
Thanks.
IP Logged
Mike Storm

FabulaTech
===================
http://www.fabulatech.com
Pages: 1  Reply Reply Notify of replies Notify of replies Print Print

« Previous topic | Next topic »